Be sure to visit us in Denver, April 16–19 at the 2018 IEEE Conference and Exposition at Booth # 1866

Gable Roof - Type 'AL' Buildings

Parkline Gable (Type 'AL') buildings have a gable style roof with a slope of 2" in 12" (minimum). The 16" wide interlocking (self framing) roof panels shall vary from a nominal 24 to 18 gauge depending upon the loading conditions. They shall be fastened to an eave cap with 1/4" diameter, Type 430, stainless steel bolts through factory punched holes.

The gable roof system is supported by a fluted, nominal 24 gauge, embossed, factory painted, 16" x 3" deep interlocking (self framing) wall panels. The panels are fastened at the top and bottom, to galvanized structural channels and wall caps, with 3/8" diameter electro-galvanized machine bolts thru factory punched holes.

Channel bracing components shall be placed across the building width to allow transmission of horizontal wind loads. All wind bracing components shall be of nominal 14 gauge galvanized steel. Where required for proper transmission of lateral wind loads, structural frame wind bents shall be installed.

Pre-engineered, prefabricated, steel buildings for any equipment enclosure needs. Fully assembled or site built. Perfect for electrical substation enclosures, oil and gas measurement buildings, switchgear enclosures, guard houses, pump houses, telecommunications buildings, and hazardous materials storage buildings.

See Parkline Design Manual (pdf) for more details on Gable (Type 'AL') buildings

Widths available: 8'0" - 32'0"
Lengths available: Unlimited