Be sure to visit us in Denver, April 16–19 at the 2018 IEEE Conference and Exposition at Booth # 1866

Single Slope - Type 'S' Buildings

Parkline Single Slope (Type 'S') metal buildings have a single slope roof (shed roof) with a minimum pitch of 1 1/2" over the building width. The 16" wide interlocking (self framing) roof panels shall vary from a nominal 24 to 18 gauge depending upon the loading conditions. They shall be attached to the wall cap through factory punched holes with #14 corrosion resistant fasteners.

The roof system is supported by a fluted, nominal 24 gauge, embossed, factory painted, 16" x 3" deep interlocking (self framing) wall panels. The panels are fastened at the top and bottom, to galvanized structural channels and wall caps, with 3/8" diameter electro-galvanized machine bolts thru factory punched holes.

Transmission of horizontal wind loads across the building shall be made through the roof panel system and no separate roof or wall diagonal bracing shall be required. Where required for proper transmission of lateral wind loads, structural frame wind bents shall be installed.

See Parkline Design Manual (pdf) for more details on Single Slope (Type 'S') buildings

Widths available: 5'4" - 24'0"
Lengths available: Unlimited