Wall Accessories

Hollow Metal Doors

All doors are 1-3/4" thick flush type. Door panels are nominal 20 gauge galvanized steel reinforced by lamination to a honeycomb core enclosed with 16 gauge end channel. The hinge reinforcements are nominal 7 gauge and the lock reinforcements nominal 16 gauge. Door frames are 4-3/4" deep double rabbeted type of nominal 16 gauge galvanized steel.

Doors and frames are factory painted with one coat of baked on primer. All doors are preassembled in their frames and hardware installed and tested prior to shipment. Field installation of single leaf door units do not require any frame assembly, or door hanging.

• 3 - 4-1/2" x 4-1/2" standard weight, plain bearing hinges per ANSI A5133 630 Satin Stainless Finish with non- rising pins.
• 3-11/16" wide x 5/8" high extruded aluminum threshold. (Out Swing)
• 1/4" x 1/2" silicone rubber weatherstripping.

• 3 - 4 1/2" x 4 1/2" standard weight ball bearing hinges per ANSI A5112 630 Satin Stainless Finish with non-rising pins.
• Mortise lockset per ANSI A156.13, Series 1000, Grade 1, Function F13, 626 Satin Chrome Finish (levers both sides).
• Cylindrical key in knob lockset per ANSI A156.2, Series 4000, Grade 2, Function F81, 630 Satin Stainless Steel Finish.
• Passage set per ANSI A156.2, Series 4000, Grade 2, Function F75, 626 Satin Chrome Finish.
• Door closer is certified to conform to ANSI 156.4 Grade 1 and meets exterior barrier free codes in 689 Aluminum Lacquer Finish.
• Rim Type "Cross Bar" panic device per ANSI A156.3, Type 1, Grade 1, Function 05, with 627 Satin Aluminum Finish.
• Rim type "Push Pad" panic device built to ANSI A156.3, Type 1, Grade 2, Function 08 with 689 Aluminum Lacquer Interior Finish and 626 Satin Chrome Exterior Finish.
• 23" wide X 20" high Adjustable blade louver with mesh insect screen.

Framed Openings

Framed openings are constructed from nominal 12 gauge galvanized steel. The jambs and head provide a minimum 2-1/2" wide inside surface for field mounting of optional hardware. Head and jamb covers are nominal 24 gauge, embossed, painted wall color.

• Sliding doors consist of a nominal 16 gauge galvanized steel channel framing system and embossed nominal 24 gauge prepainted arctic white ribbed covering. The doors are top hung design with a bottom guide rail.
• Removable wall sections consist of a framed opening capable of supporting roof and wall loads when the wall section is removed. The removable section consists of the same materials as the permanent wall. Sections are removable by unbolting from the inside of the building.
• Overhead doors
• Roll-up doors

Horizontal Sliding Windows

Sliding windows are furnished factory glazed and complete with all attaching hardware and screen. The window unit are factory assembled for single unit installation.

All window sash sections are of 6063-T5 extruded aluminum and are color finished in white or bronze baked enamel. Windows meet or exceed ANSI/AAMA 101 and AAMA 1302.5 Specifications.

• 1/2" insulated glass.

• 1/4" polished wire glass.
• 1/4" acrylic glazing.
• 1/4" obscure glass.
• 1/4" polycarbonate glazing.

Fixed Window

Fixed windows are furnished factory glazed and complete with all attaching hardware. The window unit are factory assembled for single unit installation. All window sash sections are formed from nominal 18 gauge galvanized G90 steel and factory color finished white or bronze baked on enamel.

• 1/2" insulated glass.

• 1/4" polished wire glass.
• 1/4" acrylic glazing.
• 1/4" obscure glass.
• 1/4" polycarbonate glazing.

Wall Opening Kit

Parkline supplies all necessary framing and connectors to structurally replace the panels removed by any wall opening. All trim and flashings required to make weathertight the unit placed in any opening are provided by the supplier of the unit being installed.

Adjustable Wall Louvers

Adjustable louvers are of self framing design. The louver frame are of nominal 14 gauge formed aluminum and the louver blades are nominal 12 gauge extruded aluminum. Finish are natural mill finish and do not require field painting.

Blades are pivoted on 1/2" diameter aluminum pivot pins through nylon flanged bearings and operated by means of a pull bar operating handle. All louvers are complete with an exterior mounted 18 X 14 aluminum mesh insect screen.

• Wall louvers shall have removable filters.
• Motor Operator
• 1/4" obscure glass.
• 1/4" polycarbonate glazing.

Fixed Wall Louvers

Fixed louvers are nominal 26 Gauge., G90 Galvanized Steel, 16"x16", general purpose type of self framing design with free area of 75 square inches. The finish is bright galvanized. All louvers are complete with #8 insect screening.

Gable Louvers

Gable Louvers are fixed blade type with blades set on a 45 degree slope. Blades and frames are nominal 14 gauge extruded aluminum with natural mill finish. Louvers shall include #18-14 aluminum mesh insect screens.